Pulsonix User Forum

Technical advice from Pulsonix engineers and the wider community.

 All Forums
 Help with using Pulsonix
 Manufacturing outputs
 variant missing in output file name

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Format Mode:
Format: BoldItalicizedUnderlineStrikethrough Align LeftCenteredAlign Right Horizontal Rule Insert HyperlinkInsert EmailInsert Image Insert CodeInsert QuoteInsert List

* Forum Code is ON

   Upload a file

Check here to subscribe to this topic.

T O P I C    R E V I E W
poorchava Posted - 03 Nov 2020 : 23:50:31
I want to generate schematics for 3 variants of the same design. I have setup 3 separate CAM plots for those variants, enabled them, and the output file names template is $(DesignName)_$(Variant)

For some reason, the $(Variant) part is completely omitted, whic causes all files to be named exactly the same, and those files overwrite one another.

This starts working normally when I have only a single plot enabled.

Am I missing something here?
3   L A T E S T    R E P L I E S    (Newest First)
psxforum Posted - 06 Nov 2020 : 10:31:13
turns out not to be an issue with the design itself...

Going to Setup dialog for PDF on the Cam Plot settings page, and unchecking the box for 'Combine into single document' will allow each variant to be output to its own PDF file as required.

poorchava Posted - 05 Nov 2020 : 22:19:56
I have just sent the file. Took a while as I had to clear it with the client.
lewism@pulsonix.com Posted - 04 Nov 2020 : 09:58:02
Hi Poorchava,

Unfortunately I have not been able to replicate the issue you have described in the latest build of V10.5 - (7882). Please could you send the design to support@pulsonix.com and I can look into it for you.

Many thanks