Note: You must be registered in order to post a reply. To register, click here. Registration is FREE!
T O P I C R E V I E W
Posted - 08 Nov 2020 : 16:13:08 Good morning. I have a card with a thickness of 1.6mm. in the 3d viewer the thickness of the card is shown correctly. in the STEP preview and in the file exported as STEP the thickness does not exist. Do you know how to correct the thickness represented in the STEP file? Thanks Giovanni
3 L A T E S T R E P L I E S (Newest First)
Posted - 14 Nov 2020 : 22:36:50 If it is helpful, here is my MATERIALS technology file that contains FR-4 materials for cores all from the Slash Dot sheets in IPC-2222 as well as common prepregs.
The layers are set up for a basic multilayer but for a double-sided non-multilayer board use the "FR-4 31 Laminate 8x7628" material for the core between the two Electrical layers for Top and Bottom.