Pulsonix User Forum

Technical advice from Pulsonix engineers and the wider community.

Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 Help with using Pulsonix
 Import, Export and Integration
 STEP Thickness Board
Author  Topic Next Topic  

Giovanni

Italy
7 Posts
Posted - 08 Nov 2020 :  16:13:08  Show Profile  Reply with Quote
Good morning.
I have a card with a thickness of 1.6mm.
in the 3d viewer the thickness of the card is shown correctly.
in the STEP preview and in the file exported as STEP the thickness does not exist.
Do you know how to correct the thickness represented in the STEP file?
Thanks
Giovanni

Pasolini

lewism@pulsonix.com

United Kingdom
67 Posts
Posted - 09 Nov 2020 :  14:48:00  Show Profile  Reply with Quote
Hi Giovanni,

In your step settings have you set the board thickness set to the same value as the 'board thickness' of the used layers in your Technology file?

If you are still having issues could you send the design over to support@pulsonix.com and I can look further into it for you.

Lewis
Go to Top of Page

Giovanni

Italy
7 Posts
Posted - 13 Nov 2020 :  05:13:16  Show Profile  Reply with Quote
Thanks,
I just add new layer "ISOL" material FR4 1.5 between Top and Bottom layers.
Giovanni

Pasolini
Go to Top of Page

jameshead

United Kingdom
127 Posts
Posted - 14 Nov 2020 :  22:36:50  Show Profile  Reply with Quote
If it is helpful, here is my MATERIALS technology file that contains FR-4 materials for cores all from the Slash Dot sheets in IPC-2222 as well as common prepregs.

The layers are set up for a basic multilayer but for a double-sided non-multilayer board use the "FR-4 31 Laminate 8x7628" material for the core between the two Electrical layers for Top and Bottom.

Download Attachment: JH MATERIALS.ptf
49.14 KB
Go to Top of Page
   Topic Next Topic  
Jump To: